Remotely control iQ console

This guide explains how to remotely operate an Axia iQ console installed in a production studio.

Step-by-step guide

1. Connect to the VPN, and browse to the IP address of the production studio iQ console you wish to control. 
2. Navigate to the Console Control/Remote menu.
   
3. You are now looking at the console in list form. Pick a fader to add your source to with the drop down source menu.

   1. Mouse over to the right and give that fader some gain (0 is unity; adjust levels by adding + or - dB numbers to suit; make sure to click Apply after each change).

   2. Next column to the right is the ON button followed by the four PGM busses. You want the fader ON and in PGM 1 in order to record into Audition. Apply your changes again.
      
      
4. When you’re finished, load the A:Capture show profile to reset the console to default status.